Tannewitz Bandsaws, Max Disk Sanders Ramco Wide Belt Sanders Max Industrial Line Contact Us
Home
PrevIndexNext

  DRILL PRESSES  

13" Drill Press Model: CH-16N/16NF
17" Floor Type Drill Press Model: CH-18F

 Features: 

  • Spindle is supported by high quality ball bearings.
  • Cast iron pulleys reduce vibrations.
  • Comes with non-slip rubber feed handles.
  • 45° tilting table for angular drilling.
  • Locking depth stop for accurate blind hole drilling.
  • 5/8 drill chuck and key included.
  • 16-speed.
  • On-off switch for power and light located in front of the machine.
    •

    20" Floor Type Drill Press

     Features: 

  • 1 1/2HP 1PH motor provides ample power for production drilling.
  • Quill has an internal MT#3 to accept tapered drill.
  • Press accessories.
  • Production sized tilting table with coolant trough and clamping
         slots.
  • Positive depth stop for quick and easy adjustment.
  • 3/4 drill chuck and key included.
  • 12-speed.
    •
    Options: Drill Press Vise 3"                                         
             Specifications:
    Model CH-16N / CH-16NF CH-18F CH-25
    Drilling capacity: 5/8" 3/4" 1"
    Drill chuck size: 5/8" 5/8" 3/4"
    Swing: 13" 17" 21 1/2"
    Spindle stroke: 3 1/8" 3 5/8" 4 13/16"
    Spindle distance to table: 17 1/2" / 31" 30 1/2" 27"
    Spindle distance to base: 24" / 45" 50" 47 1/4"
    Table size: 11 7/16" dia. 13 3/4" dia. 18 5/8" x 16/18"
    Spindle taper: MT#2 MT#2 MT#3
    Column diameter: 3 1/8" 3 1/8" 3 5/8"
    Number of spindle speeds: 16-speed 16-speed 12-speed
    Range of spindle speeds: 162-3500 RPM 240-3800 RPM 250-2600 RPM
    Base size: 17 5/16" x 9 7/8" (16N)
    17 3/4" x 10 1/2" (16NF)    		 17 5/16" x 10 5/8" 22 1/2" x 19 1/2"
    Motor: 3/4HP 1PH 115/230V
    Prewired 115V    		 1HP 1PH 115/230V
    Prewired 115V    		 1 1/2HP 1PH 115/230V
    Prewired 115V
    Net weight: 99 lbs 160 lbs 326 lbs


    Site Contents © Copyright 1997-2007, All Rights Reserved. 1-800-458-0590