Tannewitz Bandsaws, Max Disk Sanders Ramco Wide Belt Sanders Max Industrial Line Contact Us
Home
PrevIndexNext

  VERTICAL BANDSAW  

HIGH SPEED BANDSAW
TR20/TR28/TR40

 FEATURES: 

  • Enlarged speed range: 50-5200 ft/min to cut all materials.
  • Infinitely variable speed.
  • Blade welder, grinder and shear are front mounted
         for quick, accurate blade repair and installation.
  • Maintenance-free air pump provides air to remove
         chips from the point of cut.
  • Digital blade speed indicator.
  • Blade tension indicator.
  • Totally enclosed transmission.
  • TEFC 3 Phase motor.
  • Rip fence.
  • Heavy duty cast iron table.
  • Magnetic, low voltage controls.
  • Brush for cleaning lower drive wheel.
    •

    HYDRAULIC TABLE AVAILABLE TR2012VWH/TR2812VWH/TR4012VWH

     FEATURES: 

  • Hydraulic operated work table.
  • Motion of work table is controlled by stepless speed
         controller.
  • Extra high power for cutting
  • Work table with auto stop.
  • Work table has auto reverse.
  • These machines are designed for labor savings that will
         cut down production costs substantially.
    •
    SPECIFICATION:
      $9,000/$10,200 $10,300/$12,800 $11,900/$13,500
      20" 28" 40"
    STANDARD MODELS TR2012VW/TR2012VWH TR2812VW/TR2812VWH TR4012VW/TR4012VWH
    Throat depth 20" 28" 39 3/4"
    Work height 12 3/4" 12 3/4" 12 3/4"
    Blade width 1/8" - 1" 1/8" - 1" 1/8" - 1"
    Blade length 161 1/2" 198" 194 7/8"
    Bandwheel dimensions 20 1/2" x 1 3/4" 28 3/8" x 1 3/4" 17" x 1 3/4"
    Bandwheels number 2 2 4
    Wheel tires Replaceable rubber tire Replaceable rubber tire Replaceable rubber tire
    Blade guides Tool steel insert w/wear pin Tool steel insert w/wear pin Tool steel insert w/wear pin
    Table type FIXED FIXED FIXED
    Main table size 29 1/8" x 26 3/4" 29" x 26 3/4" 29" x 26 3/4"
    Auxiliary table size      
    Table tilt 45° R, 15° L 45° R, 15° L 45° R, 15° L
    Table height 40" 42" 40"
    Blade motor drive 3HP 3PH 3HP 3PH 3HP 3PH
    Electric controls Magnetic starter w/115V Magnetic starter w/115V Magnetic starter w/115V
    Blade speeds 50-5200 FPM 50-5200 FPM 50-5200 FPM
    Transmission 4-Speed Totally enclosed 4-Speed Totally enclosed 4-Speed Totally enclosed
    Blade welder, grinder, shear 1" CAPACITY STD 1" CAPACITY STD 1" CAPACITY STD
    Dimension (L X W X H) 51" x 41" x 81" 61 3/8" x 41" x 90 3/4" 70 1/2" x 40 1/2" x 75"
    Net weight 1720 lbs 2160 lbs 2600 lbs


    Site Contents © Copyright 1997-2007, All Rights Reserved.