6" & 8" Jointer
J6
J8
| |
$600 |
$1,150 |
| Model |
J6-6" Jointer |
J8-8" Jointer |
| Motor |
1hp 115/230v, 1ph |
2hp 230v, 1ph |
| Cutting Capacity |
|
|
| Width |
6 1/8" |
8 1/8" |
| Depth |
1/2" |
1/2" |
| Rabbeting capacity |
1/2" 6 1/8" |
1/2" 8 1/8" |
| Cutter head speed |
5000RPM |
4500RPM |
| Number of knives |
3 |
3 |
| Cuts per minute |
15,000 |
13,500 |
| Diameter |
2.4" |
3" |
| Table size |
7.3" x 45" |
9" x 66" |
| Fence size |
4" x 28" |
4" x 36" |
| Tilt right |
45 degrees |
45 degrees R&L |
| Positive stops |
90°, 45° |
90°, 45° L&R |
| Length |
45" |
66" |
| Width |
26" |
27" |
| Height |
37" |
37" |
| Gross weight |
204 lbs |
398 lbs |
|
Smooth & Accurate Cutting
CUTTER HEAD
The cutter head is precision machined and dynamically balanced from smooth running during cutting operations.
It is fitted with three H.S.S. Knives delivering 15,000 cuts per minute.
DOVETAIL TABLE WAYS
Long wearing replaceable and adjustable for both the front and rear tables. A large handwheel and depth scale provide easy depth of cut adjustments.
The outfeed table has a lock knob to hold positons firmly with a positive stop at zero depth for normal planing and surfacing operations.
KNIFE SETTING GAUGE
Rests on outside diameter of cutter head and requires no other special gauges or instruments.
The cutter head has built-in springs so the blades will stay at the proper height when locking them in place.
Accurate, quick and easy adjustments every time.
TILTING FENCE
The fence is made of cast iron and has been precision ground to produce a very fine surface.
The fence has positive stops at 90 degrees and 45 degrees right and left making it possible to perform bevel and chamfering operations.
|
|
